Articles
Search:

Home | Hobbies | Collecting







Making and Figuring of Bronze





Making articles and figures from the bronze is one of the most difficult things. There are many process involved to make articles and figures from the bronze. Among the nations famous for their bronze making skills are Italy, France and Germany. And a number of good bronzes were made in England in the eighteenth century, but little is known yet about them.

Bronze
Bronze is an alloy of copper and tin. Its use in prehistoric days is outside the scope of this book and the most important examples that will concern readers are those made in Italy and elsewhere from the sixteenth century and onwards.

The making of bronze articles and figures calls for great skill. Most were made by the 'cire-perdue' (lost wax) process, which can be described briefly as follows: the piece is modeled thinly in wax on a core of dry clay; the finished wax is then covered in a coat of clay. Holes are left so that molten metal can be poured in to take the place of the wax, which is melted and runs out.

The outer clay coating is broken off, the inner core chipped away, and the article finished by hand to remove any roughness or imperfections. Thus, it can be seen that each single bronze has to be modeled individually and with care, and that each version of the same original is slightly different from the others. All old bronzes were made by this method, which is still in use. The making of bronzes by means of a number of removable and re-usable small moulds, each of which leaves ridges on the article where it is joined, came into use in the nineteenth century. Traces of these ridges usually remain visible and their presence is taken generally as a certain sign of modern manufacture.

Among Italian modelers may be mentioned: Donatello, Andrea Briosco (called Riccio), Jacopo Tatti (called Sansovino) and the Flemish-born Giovanni di Bologna. German makers include the Vischer family, and the French sculptors Falconet and Clodion often had their work cast in bronze. The Frenchman Guillaume Coustou modeled the figures of rearing horses, known as the Marly Horses, about 1745. They were made in bronze, and in metals imitating bronze, in very large numbers in the nineteenth century. A number of good bronzes were made in England in the eighteenth century, but little is known yet about them.

Chinese and Japanese bronzes of great age and great size have been made for many hundreds of years. In addition to figures there are some fifteenth-century bells at Pekin weighing about fifty-five tons each and standing fourteen feet high. Chinese bronze altar-vessels of the Shang-Yin (1766-1122 B.C.) and Chou dynasties (1122-249 B.C.) are particularly fine and rare. Most have been buried for many centuries, and contact with earth has resulted in corrosion of the surface. Inevitably, these bronzes have been copied at later dates, but the true patina (ageing of the surface) presents a very difficult problem to the faker and it is one that is seldom solved with success.

Mention must be made of the very many fine bronze figures made in India and Siam (Thailand) in the sixteenth century A.D. and earlier. Some of the latter are gilt, and most are remarkably beautiful. The finer examples remain in the East or are in Western museums, but a few appear on the market from time to time. Reasonably good examples can sometimes be bought quite cheaply.

In West Africa, the skilful bronze and brass workers of the kingdom of Benin perhaps learned their craft from the Portuguese, with whom they had traded from the late fifteenth century. Their work is highly individual and much is very beautiful, but it is scarce and good specimens are obtainable only rarely. Examples were brought to Europe by a British punitive expedition, which captured Benin city in 1897, and there are fine collections from this source at the British Museum, the Pitt-Rivers Museum, Farnham, Dorset, the Museum of Primitive Art, New York, and in the possession of the Government of Nigeria.

Not only the Europeans but the Asian nations like Japan, China, India and Thailand also made good quality of bronze figures and articles. Some of them can still be found in some famous museums of the world. These countries usually made bronze idols, alter-vessels, and other figures and articles for both domestic use and for export.


Information and Articles: http://www.mastersmba.com

Providing Information on various topics such as Making and Figuring of Bronze, please browse our other Articles for more informative resources, we house information on every topic imaginable so regardless of your needs you can be assured to find the answer here. If you wish to reprint this on your own website, simply click the "Web Version" in the right menu, and you are presented with a pre-formatted document to use.

A lot of the information is written by the Master Article team, and published exclusively on the MastersMBA.com website, and we do our best to research all information to ensure it's as accurate as possible. However at times we also publish documents given to us by other sources, we do examine these documents to ensure they are as accurate and correct as possible however at times they discuss highly specialized fields making it hard to authenticate the validity of every fact in the document. These are written by specialists in their respective fields, and we do trust their integrity and judgment however it's always a good idea when doing any research to consult a number of sources and form your own conclusion based on a number of view points. Making and Figuring of Bronze

RSS

You can click the XML Icon Above to Read Collecting Articles Via RSS!

Design by SEO Info: SEO Forum

Providing Articles on everything from Credit