Home | Home | Home Improvement
The cost of replacing your tub is fairly low but the costs that surround it, the contractors you will have to pay to remove it, retiling after installing the inexpensive tub, and the plumber to reconnect everything, far outweigh the costs of choosing bath tub refinishing as your alternative. A simple remodeling of your bathroom can cost upwards of two thousand dollars and take seven to ten days during which you have no access to your bathroom. If you do it yourself, taking the option of refinishing instead of remodeling, you will spend around five hundred dollars and lose the use of your facility for no more than a couple of days. Bath tub refinishing is a prospect even if your tub is discolored, worn, chipped or if cleaning has become impossible. A good job of bath tub refinishing can restore the usefulness of your bath tub for another ten to fifteen years. This means that you will need to reglaze your tub. The beginning of the bath tub refinishing project will require cleaning by the use of a special acid. The facade of the tub must be cleaned and prepared before the new surface can be applied. The next step in your bath tub refinishing process is to sand down the area that you just cleaned. It is recommended that you use both a sander as well as doing some of the areas by hand. The biggest part of the bathtub refinishing is the actual glazing process. This is recommended as a multiple step process. There should be two under coats applied before the tops coats are put on. To make certain the finish looks smooth it will require three more coats to seal the top. This gives you the opportunity to change the color as you reglaze. Bath tub refinishing is a big job, but once you get to the stage of putting on the top coat you are almost done. Now its just a few jobs that need to be completed and your effort at refinishing will begin to pay off. The reglazing should have taken about a half a day, but if you are new to projects like this it may have taken a little more. Lastly you need to regrout the tiles around the tub to make sure they are properly waterproof and so keep mold and mildew from taking hold. Once this is all done you can expect to wait forty-eight hours for everything to be dry before you are able to use your tub again. Then you will be able to look with pride at the bath tub refinishing job that you did so well.
Information and Articles: http://www.mastersmba.com
Providing Information on various topics, please browse our other Articles for more informative resources, we house information on every topic imaginable so regardless of your needs you can be assured to find the answer here. If you wish to reprint this on your own website, simply click the "Web Version" in the right menu, and you are presented with a pre-formatted document to use.
A lot of the information is written by the Master Article team, and published exclusively on the MastersMBA.com website, and we do our best to research all information to ensure it's as accurate as possible. However at times we also publish documents given to us by other sources, we do examine these documents to ensure they are as accurate and correct as possible however at times they discuss highly specialized fields making it hard to authenticate the validity of every fact in the document. These are written by specialists in their respective fields, and we do trust their integrity and judgment however it's always a good idea when doing any research to consult a number of sources and form your own conclusion based on a number of view points. Also if you are looking for Google Chrome Extensions you can check out that link.
